불필요한 부담은 줄이고, 효율은 높이세요
산업 및 환기 기술을 위한 간편한 EC 시스템 솔루션

RadiFit은 ...을 상징합니다

콤팩트한 설계, 높은 효율, 간편한 레트로핏.

후방 곡선형 블레이드를 적용한 원심 팬으로, 듀얼 인렛과 스크롤 하우징 구조를 갖추고 있습니다.

스크롤 하우징, 듀얼 인렛, 후방 곡선형 블레이드를 적용한 RadiFit 원심 팬 제품군은 산업 및 환기 기술의 다양한 애플리케이션을 위한 새로운 시스템 솔루션입니다. 고효율 EC 모터를 적용하여 고압 환경에서도 뛰어난 효율을 제공합니다. 또한 컴팩트한 설계와 경량 구조, 높은 내구성을 갖춘 것이 특징입니다. 무엇보다 RadiFit의 설치 치수는 표준화되어 있어 설치 및 교체가 매우 간편합니다. 또한 유지보수가 필요 없는 유지보수 프리(Maintenance-free) 솔루션을 제공합니다.

장점 한 눈에 보기

  • 콤팩트하고 효율적인 설계, 간편한 레트로핏

  • 고압에서도 뛰어난 에너지 효율

  • 가볍고 견고한 구조

  • 간편한 설치

RadiFit 원심 팬의 성능 범위

원심 팬의 대표적인 공조(공기조화) 적용 사례

RadiFit Ø 250 mm가 적용된 로우 프로파일 에어컨디셔너

공조가 적용된 건물에서는 배출되는 따뜻한 공기를 이용해 유입 공기의 온도를 조절합니다. 이를 위해 팬이 공기를 열교환기를 통과시킨 후 급기 및 배기 덕트로 전달합니다. 엄격해진 에너지 절감 규정은 팬에 대해 콤팩트한 설계, 유연한 제어 기능, 그리고 높은 효율을 동시에 요구합니다.

이러한 요구를 충족하는 솔루션이 바로 새로운 RadiFit입니다.

Central air conditioning unit with RadiFit ø 400 mm

In central air conditioning systems, various components are used, such as filters, heat exchangers, humidifiers and dehumidifiers. The job of the fans is to convey the air through all these components, as well as through a branching duct system, whilst at the same time providing compensation for the high pressure losses.
The system should also save as much space as possible and permit simple, demand-based ventilation for a large number of rooms. The flexible, robust and easily implemented solution: our new EC centrifugal fans

원심 팬의 주요 산업용 애플리케이션 사례

RadiFit Ø 310 mm가 적용된 발전기 냉각

팬이 주변 공기를 **발전기의 좁은 공기 통로(덕트)**로 강제로 통과시켜 발전기를 냉각합니다. 이 애플리케이션에서도 ebm‑papst 원심 팬의 강점이 그대로 발휘됩니다. 통합 속도 제어 기능을 통해 부하나 열 발생량에 맞춰 냉각 성능을 항상 최적으로 조정할 수 있습니다. 또한 별도의 제어 장치가 필요하지 않아 설치 공간을 거의 차지하지 않습니다. 더불어 유지보수가 필요 없는 maintenance-free 설계로 운영 편의성까지 제공합니다.

Retrofit: old replaced with high efficiency

Energy efficiency means low operating costs. Our centrifugal fans with GreenTech EC technology are so much better than conventional fans that even converting existing systems quickly pays off. What's more, the new product range has a particularly long service life and is absolutely maintenance-free, which helps to reduce operating costs and life cycle costs even further. And, last but not least, ebm-papst supplies the fans complete with housing and fitted with control electronics (VSD), so installation costs are also kept to a minimum.
The difference becomes clear if you compare an old belt drive with a flange-mounted motor: Instead of having to bother connecting up several different components, everything is already integrated into the RadiFit in a highly compact unit with maximum energy efficiency.

보다 상세한 정보 알아보기

RadiFit EC 원심 팬 – 콤팩트한 설계, 높은 효율, 간편한 레트로핏

Would you like more information?
Our specialists would be happy to get in touch with you.

“Always well informed”

 

The more information that is available, the easier it is to keep everything under control. Which is why the people responsible for upgrading the data center of the Canton of Zug decided on efficient fans with MODBUS interface.