Technical description
Weight 2.2 kg
Motor size 55
Size 146 mm
Rotor surface Galvanized
Electronics housing material PP plastic
Impeller material PA plastic
Housing material PP plastic
Motor suspension Motor vibration-damped on both sides
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection Motor IP54, electronics IP20 / installation- and position-dependent
Insulation class "F"
Max. permitted ambient temp. for motor (transport/storage) + 80 °C
Min. permitted ambient temp. for motor (transport/storage) - 40 °C
Installation position Any
Condensation drainage holes None, open rotor
Mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 1.1 mA - Tach output - Motor current limitation - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for motor
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC circuit feedback According to EN 61000-3-2/3
EMC interference emission According to EN 61000-6-3 (household environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Plug
Motor protection Thermal overload protector (TOP) internally connected
with cable Variable
Protection class I (with customer connection of protective earth)
Conformity with standards EN 60335-1 / CE