D3G318AA3711

D3G318-AA37-11

EC centrifugal fan

Motor: M3G112-GA

Technical description
Weight 21.2 kg
Motor size 112
Size 318 mm
Rotor surface Painted black
Electronics housing material Die-cast aluminum
Impeller material Sheet steel, galvanized
Housing material Sheet steel, galvanized
Motor suspension Motor mounted on brackets for one-sided vibration damping
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP54
Insulation class "B"
Moisture (F) / Environmental (H) protection class H1
Max. permitted ambient temp. for motor (transport/storage) +80 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal
Condensation drainage holes None
Mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Alarm relay - Motor current limitation - PFC, active - Soft start - Control input 0-10 VDC - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC circuit feedback According to EN 61000-3-2/3
EMC interference emission According to EN 61000-6-4 (industrial environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Motor protection Thermal overload protector (TOP) internally connected
with cable Variable
Protection class I (with customer connection of protective earth)
Conformity with standards EN 61800-5-1 / CE
Approval EAC