D3G180AB6201

D3G180-AB62-01

EC centrifugal fan

Motor: M3G074-CF

Technical description
Weight 7.0 kg
Motor size 74
Size 180 mm
Rotor surface Thick-film passivated
Electronics housing material Die-cast aluminum
Impeller material Sheet steel, galvanized
Housing material Sheet steel, galvanized
Motor suspension Motor vibration-damped on both sides
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP44
Insulation class "B"
Moisture (F) / Environmental (H) protection class H1
Max. permitted ambient temp. for motor (transport/storage) +80 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal
Condensation drainage holes None
Mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC max. 1.1 mA - Tach output - Power limiter - Motor current limitation - Soft start - Control input 0-10 VDC/PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for motor
EMC immunity to interference According to EN 61000-6-1
EMC circuit feedback According to EN 61000-3-2/3
EMC interference emission According to EN 61000-6-3
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) < 3,5 mA
Motor protection Thermal overload protector (TOP) internally connected
with cable Variable
Protection class I (with customer connection of protective earth)
Conformity with standards EN 60950-1; EN 60335-1; EN 61800-5-1 / CE
Approval EAC