W3G990IC1205

W3G990-IC12-05

EC axial fan

Motor: M3G200-QA

Technical description
Weight 132 kg
Motor size 200
Size 990 mm
Rotor surface Painted black
Electronics housing material Die-cast aluminum, painted black
Blade material Die-cast aluminum
Support ring material Steel, coated with black plastic (RAL 9005)
Fan housing material Sheet steel, galvanized and coated with black plastic (RAL 9005)
Number of blades 5
Blade pitch
Airflow direction V
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP54
Insulation class "F"
Moisture (F) / Environmental (H) protection class H2
Max. permitted ambient temp. for motor (transport/storage) + 80 °C
Min. permitted ambient temp. for motor (transport/storage) Transport -40°C/storage -60 °C
Installation position Shaft horizontal or rotor on bottom
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Operation and alarm display - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameter setting) - External release input - Alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS-485 MODBUS-RTU - Soft start - EEPROM write cycles: 100,000 maximum - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal box
Motor protection Reverse polarity and locked-rotor protection
Protection class I (with customer connection of protective earth)
Conformity with standards EN 61800-5-1 / CE
Approval UL 1004-7 + 60730-1 / EAC / CSA C22.2 No. 77 + CAN/CSA-E60730-1