EC axial fan - HyBlade

Motor: M3G112-EA

Technical description
Weight 14.1 kg
Fan size 630 mm
Rotor surface Painted black
Electronics housing material Die-cast aluminum, painted black
Blade material Press-fitted sheet steel blank, sprayed with PP plastic
Guard grille material Steel, coated with black plastic (RAL 9005)
Number of blades 5
Blade pitch -5°
Airflow direction "V"
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP54
Insulation class "B"
Moisture (F) / Environmental (H) protection class F4-1
Max. permitted ambient temp. for motor (transport/storage) +80 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor storage Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Alarm relay - Motor current limitation - PFC, active - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC circuit feedback According to EN 61000-3-2/3
EMC interference emission According to EN 61000-6-4 (industrial environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Motor protection Thermal overload protector (TOP) internally connected
with cable Variable
Protection class I (with customer connection of protective earth)
Conformity with standards EN 61800-5-1 / CE
Approval CCC / EAC