Press releases

24 August 2017

ebm-papst at the Busworld trade show in Kortrijk

Hybrid and electric motors are also being increasingly used in buses – they are gradually displacing pure combustion engines. ebm-papst will be exhibiting a new, robust fan for motor cooling at the Busworld trade show in Kortijk, Belgium, Rambla South, no. R44 from October 20-25, 2017. Grime from the road can’t harm it!

The robust axial fan from ebm-papst for motor cooling is highly resistant to grime deposits.
The robust axial fan from ebm-papst for motor cooling is highly resistant to grime deposits.
 
A FanGrid consisting of six axial fans cools the motor, protecting the vehicle against overheating.
A FanGrid consisting of six axial fans cools the motor, protecting the vehicle against overheating.

As a rule, roads are always full of dirt and grime, even when buses only operate in city traffic. Dust from the street, fine particles and chemically aggressive soiling can deposit on their fan blades. If the deposits are uneven, this leads to an imbalance that limits the fan’s service life and can also lead to premature failure.

Special impeller design increases efficiency and prevents deposits
The new axial fan is highly resistant to grime deposits. The special aerodynamically optimized blade form prevents grime from depositing on the fan. This results in a particularly long service life; a fact that has been documented in numerous tests. The impeller facilitates higher speeds that allow it to create extra cooling capacity reserves. Combining it with fixed guide vanes has successfully increased the fan’s efficiency – without the typical oil slinger. With this product, the world market leader has responded to market requirements for a robust, energy-saving fan that is resistant to grime and equal to heavy duty tasks.

Parallel operation ensures redundancy and reliability
Fans arranged as a FanGrid provide another benefit. In comparison to one large fan, the parallel operation of several small fans makes it possible to activate the fans according to need and incorporate redundancy into their design. If one fan fails, the remaining ones can be operated at higher speed to compensate for the failure. This can compensate for a possible drop in air performance and protect the vehicle’s motor against overheating.

Electronics withstand high-pressure cleaner
The electronics have a dust-free design in degree of protection IP6k9k and the fan will also withstand a high-pressure cleaner if the vehicle is taken through a car wash. The fan delivers air performance of up to 3,000 m³/h. A control system is possible via PWM or linear voltage. The fan is designed for operation in a 24 V DC grid and available immediately.

more

Katrin Lindner
Trade press coordinator
Phone: +49 7938 81-7006
Fax: +49 7938 81-97006
Katrin.Lindner@de.ebmpapst.com

ebm-papst Mulfingen GmbH & Co. KG
Germany
Bachmühle 2
74673 Mulfingen